Lighting
Finishing & interiors · Lighting
LED panels on the ceiling, a desk lamp at the workstation and floor lamps in the lounge. We draw up a lighting plan per room and install the fittings with our own installation team.
Lighting determines how pleasant it is to work
Lighting determines how pleasant it is to work at a workstation. BNR supplies lighting for offices: LED panels, desk lamps, floor lamps, fittings and spotlights. We advise on the combination of daylight and artificial light and on the health and safety guidelines that apply to your space.
It is almost always about three layers at once: general lighting for the room, task lighting at the workstation and accent lighting for the look. If you only tackle the first layer, you are left with an evenly lit floor on which no one can read their screen properly.
This is what office lighting looks like
Eight examples from our own range: above the table, on the desk and in the lounge.








Four figures we look up when choosing
These values come from the specifications of the fittings themselves, not from a standard. What your space needs follows from the lighting plan.
The three layers of a lighting plan

General lighting
LED panels for ceiling mounting in office spaces, meeting rooms and workstations. Available in different sizes and light colours, so the general lighting suits the room. If there is a suspended ceiling, the light can go in the ceiling tile itself: the Tiles EcoSUND is a 593 × 593 × 40 mm tile with a dimmable 5 W LED spotlight that also absorbs sound.

Task lighting at the workstation
Desk lamps with adjustable brightness and colour temperature, for individual workstations and home workstations. That way every employee gets light matched to their own task.
The Pear goes in three steps from 3000 K warm white to 6500 K daylight white. The Funki has four colour settings, six brightness levels and two USB-C chargers in the base. The Tulp folds shut and then stands upright, handy on a flexible workstation.

Ambient and accent lighting
Floor lamps for indirect light in lounge and reception areas, supplemented with fittings and spotlights for accents. Gives a calm, presentable look.
From Karboxx we carry six series — Planet, Blonde, Escape, Grace, Ola and Babel — from round LED rings to shades of fibreglass, linen and honeycomb fabric. Dimmers, drivers and ceiling roses are listed per series in the description.
Six things that make office lighting work
Not looking into the light source
With screen work, what counts is not only how much light there is, but also how bright the fitting itself appears. The Work series has LEDs with UGR ≤ 19; the Funki and the Tulp shield the LED with a reflector.
Colour temperature per moment
Cooler light in the morning helps with concentrated work, warmer light at the end of the afternoon is more pleasant for the eyes. Lamps with adjustable colour temperature leave that choice to the user.
Sensors and dimming
LED fittings use less power than the fluorescent and halogen lighting still found in many buildings and last longer: a lifespan of 50,000 hours is stated for the LED in the Pir, the Pear and the Tulp, among others. Sensors and dimming functions are possible: the Work fittings have a built-in motion sensor and daylight control.
Light and acoustics in one
A lamp can also dampen sound. The Hepburn of pressed felt and the ECO-light of PET felt absorb sound reflections, and the LightSound system alternates LED modules with class A acoustic panels.
Colours that are true
If you assess print or samples, you want colours on paper and screen to remain recognisable. The Tulp and the Funki have a CRI above 80; the LED in the Tiles ceiling tile exceeds 95.
Connection planned in advance
A lamp mounted in the desk top requires a drill hole and a cable to the floor: for The Lightning table lamp, a hole of Ø 25 mm. Ceiling fittings require a driver and sometimes a ceiling rose.
From survey to adjusted
Assessing current lighting and daylight
We look at the existing fittings, the daylight coming in and the layout of the workstations, and hear where employees are bothered by too little or disturbing light.
Drawing up a lighting plan
For each room we record which general, task and accent lighting is needed, matched to the use and to the applicable health and safety guidelines.
Choosing fittings
You choose LED panels, desk lamps, floor lamps or spotlights that suit the lighting plan and your interior. Dimmers, drivers and ceiling roses are included in the order.
Installing and adjusting
Our own installation team installs the lighting and sets the dimming levels and sensors. After handover, you go through the result per room together with us.
Lamps and fittings for the office
A selection; sizes, colours and light values are listed for each product.
Astel desk lampMaul · with Qi charging pad
Pir LED desk lampMaul · base or desk clamp
Funki LED desk lampGötessons · four colour settings
Work table lampScreen work · UGR ≤ 19
The Lightning floor lampGötessons · uplight and downlight
Planet round LED pendant lightKarboxx · ring 70, 90 or 110 cm
Hepburn pendant lightGötessons · felt, three sizes
LightSound lighting panelQuadrifoglio · fifteen configurations
Four reasons to have the lighting plan made
Expertise since 2008
We have been furnishing offices since 2008 and know which lighting suits which type of space and work.
Tailored lighting plan
Every office calls for its own solution. We draw up a lighting plan per room, including free interior advice and 3D design. See also workstation advice.
Our own installation team
Installation and adjustment by our own fitters, combined with the rest of the interior. One party for delivery and installation.
1,000 m² showroom
At Westbaan 170 in Moordrecht you can see lighting in a furnished setting. Visits by appointment via the showroom page.
Would you like to improve the lighting in your office? Call 010 - 753 60 40 or request a lighting plan with no obligation.

Meeting solutions →
Acoustics & room dividers →
Ergonomic working →