Skip to content

Cart

Your cart is empty

Wall finishes (acoustic, decorative)

Round CIRA acoustic panels in dark grey and two shades of blue on a light wall

Finishing & furnishing · Wall finishes

The wall determines how a space sounds and looks

Acoustic and decorative wall finishes: covering across the entire wall, panels in colour and shape, and lettering in your corporate identity. We advise on material and take care of the installation.

What it is about

A finish for the space, not a separate product

A wall finish is the finish of the space itself. The covering runs across the entire wall and therefore does two things at once: it absorbs sound and it determines how the space looks. In an open office space that means less reverberation, in a meeting room better speech intelligibility, and in a reception area a wall that expresses your company.

We work with fabric, felt and wood, with 3D wall panels, photo walls and prints, and with lettering and imagery in your colours. The choice depends on the space: what it is used for, how the wall sounds now, and how much passes along that wall.

The shop holds the separate part of that range: acoustic panels for wall and ceiling by ROFA, dUTCHCREEN, Quadrifoglio, Nyink and Götessons, round and rectangular, in virtually any size. The bespoke work — a complete wall, a print, lettering — goes via a quotation.

If it is about separate screens or room dividers that you can move, you will find them on acoustics and room dividers. If it is about placing or moving the wall itself, that belongs with system walls.

In brief
Acoustic wall coveringFabric, felt or wood3D wall panelsRound and rectangular panelsPhoto walls and printsLettering in your corporate identityWhiteboard and writing wallsAlso on cabinets and the ceilingMade to measure and installedMaterials can be seen in the showroom
Mood image

This is what an acoustic wall finish looks like

Five examples from our own range: whole walls, compositions of separate panels and the ceiling.

ROFA acoustic wall panels above a seating corner in a high reception area
Wall panels in a high reception area, where echo is noticed soonest
Office space with yellow and blue acoustic wall panels and a standing table with bar stools
Yellow and blue panels at a standing table: colour and damping in one
Round white acoustic ceiling panels under a wooden ceiling in a lounge space
Ceiling panels under a wooden ceiling
MUTE acoustic panels: square panels in blue, purple, red, green and grey on a white wall
Square panels in five colours as a single wall surface
Waiting corner with round purple acoustic wall panels above two armchairs and a round table
Round panels above a waiting corner
What a wall can do

Six points that determine the choice

Material across the entire wall

Sound-absorbing covering in fabric, felt or wood, across the whole wall instead of in separate areas. Acoustics and finish in one go.

Less reverberation in open spaces

In an open office space sound bounces back and forth between hard walls. Covering across a large wall area reduces that reverberation.

Speech intelligibility in meetings

In meeting rooms the point is not that it is silent, but that people understand each other well. A covered wall helps with that.

Corporate identity on the wall

Wall covering, photo walls and prints in your colours, with lettering and imagery. The dUTCHCREEN MUTE panel is also available with your own image or logo.

Writing on the wall

Whiteboard and writing walls for brainstorming and meeting rooms, so that the wall joins in the discussion.

Places with heavy use

In corridors and in through-traffic the wall takes knocks. Wooden wall panels give a warm look there that can stand daily use.

Three directions

Acoustic, decorative or practical — often all three

Three ways to finish a wall. They are not mutually exclusive: in most projects we combine two or three of them.

Light acoustic wall panels in a meeting room with a table and upholstered chairs

Acoustic wall covering

Across the entire wall · fabric, felt or wood · made to measure

Sound-absorbing covering across the entire wall, in fabric, felt or wood. Reduces reverberation in open office spaces and improves speech intelligibility in meeting rooms. Which walls you cover, and in which material and colour, we determine together with you.

The ROFA wall panels are 4, 8 or 12 cm thick and upholstered in the fabric group you choose; ROFA states Aw 0.90 and reaction to fire Euroclass A1 to EN 13501-1 for them. The AkoestiekA panels go up to 2400 × 1200 mm at 50 mm thickness, have no visible profile and can be installed without structural work.

If there is no wall to cover, there is the free-standing BELI column, a panel on the back of a free-standing cabinet, or Fabricks: blocks of 300, 600 or 1200 mm that are built up into a wall on aluminium posts, with power and data cables through the posts.

MUTE acoustic panels in orange and green on an office wall

Decorative finish and corporate identity

Reception and meetings · your colours · lettering and imagery

Wall covering, 3D wall panels, photo walls and prints in your colours. Lettering and imagery on the wall strengthen your company identity in reception areas and meeting rooms, executed in your corporate identity.

The shop holds the dUTCHCREEN panels: the rectangular MUTE panel can be made to your own size and finished with an image or logo, the round CIRA panel comes in Ø 50, 65 and 75 cm, to be combined into a composition. For both there is a choice of over seventy fabrics; we request a sample for you.

Round LightSound acoustic lighting panels in blue and green on a green wall above two workstations

In conjunction with ceiling, floor and window

All surfaces together determine how a space sounds

How a space sounds is determined by all its surfaces together. That is why we do not look at the wall alone, but at the combination with ceiling, floor covering and window coverings — in material and colour and in what it does to the sound.

If little wall is available, the emphasis shifts upwards. The Götessons EcoSUND ceiling tiles of 593 × 593 mm fit a suspended ceiling with a T-24 grid, and the BNR ceiling panels come in three types: Flat, Volumetric and Baffle. Where both light and damping are needed, Quadrifoglio's LightSound combines LED modules with acoustic panels in a single fitting.

This is how we approach it

Four steps

1

Assessing the wall and its use

On site we look at how the wall sounds now and what the space is used for: meetings, concentration or reception.

2

Choosing material and colour

Advice on material, colour and pattern, matching your corporate identity and the effect you want. Materials can be seen and felt in the showroom.

3

Application

Installation by skilled professionals, made to measure for your wall.

4

Handover

A check against the agreed specification, removal of waste material and handover of the space.

Why BNR

Four things that make the difference

Advice on site

We assess the space on site and advise on material, colour and the combination of acoustic and decorative finishes.

Bespoke work

Wall covering, panels and prints are made to measure for your wall and your corporate identity, including lettering.

Installation by skilled professionals

Our own installation team applies the finish, including during a refurbishment or a project furnishing.

1,000 m² showroom

At Westbaan 170 in Moordrecht you can see and feel materials and finishes. Visits by appointment.

Expertise since 2008
One point of contact
Our own installation team
Advice on site
1,000 m² showroom

Discuss your wall finish with us: call 010 - 753 60 40 or request advice without obligation.