Actiforce · the AF range
Actiforce AF sit-stand desks
The AF range is Actiforce's aluminium line: built lighter than the Steelforce frames and therefore the more affordable sit-stand desk for an ordinary workstation. We supply five versions, one of them with a hand crank.
Five versions, two types of base
The AF range is meant for the workstation that simply has to work: one or two screens, a laptop, a docking station. The load capacity is 60 kg on the AF 110, AF 140 and AF 150 and 80 kg on the AF 250. If you have a heavier set-up in mind — three screens, a dual monitor arm — you are better served by the Steelforce range — which sits at 120 kg and above.
Much of the difference within the range comes down to the cross beam. The AF 110 and the AF 150 have a beam between the two legs, which makes the base noticeably stiffer; you notice that above all with the largest top at the highest setting. The AF 140 and the AF 250 do not have that beam, which leaves the space under the top clear across the full width for a pedestal, a footrest or a computer cabinet.
The second difference is the adjustment range. The AF 250 goes furthest in both directions — 63 to 128 cm — and is therefore the only one in the range that suits practically any body height. The AF 110 and AF 150 run from 68 to 114 cm, the AF 140 from 70 to 116 cm. Those are the frame heights from Actiforce, so without a top and with a tolerance of ± 1 cm; for the height of the work surface add the 25 mm of our top.
Four of the five adjust electrically with the control under the top. For those Actiforce states an adjustment speed of ± 23 mm/s on the AF 140, ± 24 mm/s on the AF 150 and ± 31 mm/s on the AF 250, at a noise level of less than 50 dB(A). The AF 110 does it with a hand crank: 6 mm per turn, so around 75 turns over the full range of 46 cm. For that you need no socket and there is no electronics to break.
The five versions
Everything in the AF range →
AF 140
70 – 116 cm · 60 kg · no cross beam
Electrically adjustable for a single workstation. The T-leg has no cross beam, so everything under the top stays clear — handy if a pedestal or a waste bin has to go underneath, and it looks calmer in an open-plan office.

AF 150
68 – 114 cm · 60 kg · with cross beam
The same layout as the AF 140, but with a cross beam between the legs that makes the base stiffer. Also two centimetres lower: from 68 cm, which can make the difference for anyone who is short.

AF 250
63 – 128 cm · 80 kg · no cross beam
The heaviest of the range, and the only one with a range that is wider both upwards and downwards. Two-stage columns of 154 x 63 mm, T-leg without a cross beam, so the full width under the top stays clear.

Corner desk AF 250
63 – 128 cm · 80 kg · left or right
The AF 250 with an attached side top: a work surface of 180 x 80 cm with a panel of 80 x 60 or 100 x 60 cm beside it. The whole desk goes up and down electrically. Frame in aluminium.

AF 110
68 – 114 cm · 60 kg · hand crank
Adjusting with the crank instead of with a motor: no socket, no cable along the leg, no electronics. The most affordable sit-stand desk we carry. Frame in aluminium.
Crank or motor: when to choose which
The AF 110 and the AF 150 stand on the same base with the same cross beam and the same range of 68 to 114 cm. The only difference is how the top comes up.
The AF 110 has a hand crank under the top. For it Actiforce states 6 mm per turn: the full range of 46 cm therefore takes around 75 turns. In exchange you need no power point in the right place, no cable runs along the leg and there is nothing that can fail. Interesting for flexible workstations, a home workstation, or a room where the socket is on the wrong side.
The AF 150 does the same with a motor and a switch on the top, at ± 24 mm/s and less than 50 dB(A). Anyone who switches between sitting and standing all day is better off with it: with a hand crank that switching becomes a hurdle after a few days, and then the desk stays where it is.
Our honest assessment: if you are buying sit-stand desks because people really do have to start alternating, choose electric. If you are buying them to set a workstation to the right height and then leave it there, the crank is fine.
Compare the AF range →
The five versions side by side
To the collection →| Model | Adjustment | Frame height | Adjustment speed | Noise | Load capacity | Collision detection | Top sizes | Base | Frame colours |
|---|---|---|---|---|---|---|---|---|---|
| AF 140 | Electric | 70 – 116 cm | ± 23 mm/s | < 50 dB(A) | 60 kg | Fitted | 120 x 80 to 180 x 80 cm | T-leg, no cross beam | Aluminium, black, white |
| AF 150 | Electric | 68 – 114 cm | ± 24 mm/s | < 50 dB(A) | 60 kg | Fitted | 120 x 80 to 180 x 80 cm | T-leg with cross beam | Aluminium, black, white |
| AF 250 | Electric | 63 – 128 cm | ± 31 mm/s | < 50 dB(A) | 80 kg | Fitted | 120 x 80 to 180 x 80 cm | T-leg, no cross beam | Aluminium, black, white |
| Corner desk AF 250 | Electric | 63 – 128 cm | ± 31 mm/s | < 50 dB(A) | 80 kg | Fitted | 180 x 80 + 80 x 60 or 100 x 60 cm, left or right | T-leg, no cross beam | Aluminium |
| AF 110 | Hand crank | 68 – 114 cm | 6 mm per turn | Not applicable | 60 kg | Not applicable | 120 x 80 to 180 x 80 cm | T-leg with cross beam | Aluminium |
Figures from the spec sheets, manuals and product pages of Actiforce, checked on 25 September 2026. Frame heights are without a top, with a tolerance of ± 1 cm; for the height of the work surface add 2.5 cm. All five have a top of 25 mm in eight colours. The stroke is 46 cm on the AF 110, AF 140 and AF 150 and 65 cm on the AF 250. On all AF frames the drive sits externally under the top.
Drive, collision detection and certificates
The AF frames have an external drive: the motor does not sit in the columns but under the top. The AF 140 and the AF 150 are single-stage, the AF 250 and the corner desk AF 250 two-stage. They run on 100 – 240 V, with a duty cycle of 10 per cent — 1 minute on, 9 minutes off — and a standby consumption of at most 0.21 W on the AF 140. The legs are of powder-coated aluminium, the top supports, the cross beam and the feet of powder-coated steel; on the AF 110 the feet are of aluminium as well.
For the AF 140, AF 150, AF 250 and the corner desk AF 250 Actiforce states collision detection as fitted. On the AF 110 it does not apply: there is no motor that has to be stopped. No frame has a built-in socket; a cable tray is an option on every frame.
Certificates: for the Aluforce Pro 150 M Actiforce publishes a TÜV SÜD, ETL, UL, FCC, LVD and EMC certificate, for the Aluforce Pro 250 M a TÜV, ETL and LVD certificate and for the Aluforce Pro 140 M an LVD and EMC certificate.
The controls run via an ActiSwitch switch under the top. The ActiSwitch Eco-Memory stores three preferred heights; there is also an ActiSwitch Pro Memory.
Related pages
The full Actiforce programme we carry is on the Actiforce brand page. The heavier steel line — with 120 and 150 kg load capacity, tops up to 320 cm and versions at 120 and 135 degrees — is on Actiforce Steelforce.
Looking for desks from several brands side by side? Then take a look at the collections sit-stand desks (electric), corner desks and cable management. An overview of all brands is on the page brands.
Why buy the AF range from us
The base comes from Actiforce. The interior is our work.
- Advice on site, and a free 2D or 3D floor plan of your space
- Delivery and assembly by our own fitters
- One point of contact from the first conversation through to handover
- 1,000 m² showroom in Moordrecht, where you can try the furniture yourself
- We take in old furniture for reuse

A proposal with AF desks
Tell us which room it is for and how many workstations you are looking for. Then we choose the version, the top size and the colour — with a floor plan, and without obligation.
Tops, cables and warranty
On all five versions the top is 25 mm thick, in eight colours: Lindberg oak, mid oak, natural oak, brown oak, American walnut, concrete look, light grey and white. On the AF 140, AF 150 and AF 250 you choose the frame in aluminium, black or white; the AF 110 and the corner desk AF 250 we supply in aluminium. A screen never shows a decor exactly; if in doubt, ask for a sample.
On a desk that goes up and down you want the cables to move with it. Whatever suits your version — a cable tray under the top, a cable drawer or a cable spiral along the leg — we put in the proposal and fit during assembly; the separate range is under cable management. On Actiforce you get a 5-year warranty from us.
The range: Actiforce AF
5 items











