Se7en · Workplace chairs
Se7en meeting, counter and work chairs
Seven models alongside the office chair programme: two meeting chairs from the Comfort line, two counter chairs with a footring for the counter and reception, two work chairs for production and the workshop and a sit-stand stool of biobased plastic with cork. Delivery and assembly by our own fitters.
Three groups alongside the office chairs
Se7en is the chair brand of the Interstuhl group. The greater part of the programme consists of office chairs, but alongside those there are seven models with us in the webshop that belong somewhere else. We have put them into three groups.
The first group are the meeting chairs from the Comfort line: the Kai LX006 on castors and the Nova LX007 on a sled frame. Both are upholstered in Lucia, Remix or Steelcut Trio 3 and comply with EN 16139, the standard for visitor chairs.
The second group are the counter chairs. These are ordinary office chairs from the programme, but with a higher gas lift and a footring: the Anne's counter LX001 from the Comfort line and the Julian's counter LX002 from the Pro line. Both go up to 77 cm seat height and comply with NEN-EN 1335.
The third group is the workshop: the Industry 9633 and 9631 with Skintec upholstery that you can wipe down, wash and disinfect, plus the Charly LX008 sit-stand stool. The latter is not a chair but a stool of 5.34 kg that you carry by the textile strap.
Meeting chairs
All meeting chairs →
Kai LX006
Comfort · seat height 41 – 53.5 cm · on castors
Compact meeting chair with adjustable seat height, fixed armrests and a plastic star base on twin castors.

Nova LX007
Comfort · sled frame · stackable in fours
The same shell on a sled frame of steel Ø 22 mm. Four chairs stack on each other, so the meeting room is quickly cleared.
Does the meeting table stay put and is the room used only for discussions? Then the Kai on castors is more pleasant to use. Does the room also have to serve as a lunch room or training room, then the stackable Nova is the logical choice.

Castors or a sled frame
The Kai and the Nova have the same upholstered shell and the same black plastic back shell. The difference is under the seat: the Kai stands on a plastic star base with twin castors and is height-adjustable, the Nova on a fixed sled frame of powder-coated steel.
That makes the Kai suitable for a place where people sit for longer and want to set it up themselves. The Nova is intended for rooms that are laid out differently each time: it is stackable in fours and can optionally have felt glides.
Both models come as standard in Lucia black from stock, supplied assembled. For the other colours and for Remix and Steelcut Trio 3 the lead time is about six weeks.
Everything about the Se7en brand →Counter and service-desk chairs with footring
To the collection →
Anne's counter LX001
Comfort · seat height 58.5 – 77 cm · 2D armrests
The Anne with a higher gas lift and a footring of polished aluminium. Upholstered backrest, height-adjustable.

Julian's counter LX002
Pro · mesh backrest · 4D T armrests
The service-desk version of the Julian: mesh in the backrest, 4D T armrests with soft pad and a polished aluminium base.
If the employee stands behind a counter 110 cm high, an ordinary office chair falls short. These two go up to 77 cm seat height and have a footring, so the feet keep support.
What makes a counter chair different
A counter chair is not a separate model, but an existing office chair with two changes. The gas lift is longer, so the seat height ends not at 52 but at 77 cm. And there is a footring under it, because at that height the feet no longer reach the floor.
The rest stays the same as the office chair the model is based on. On the LX001 that is the Anne LX111 with an upholstered backrest and 2D armrests; on the LX002 the Julian LX212 with a mesh backrest and 4D T armrests. Both have a lockable synchronous mechanism with weight adjustment and seat depth adjustment.
Does someone work alternately at a counter and at an ordinary desk? Then a sit-stand stool or a high work chair is sometimes more practical than a counter chair. We are happy to look at it with you.
View the Se7en office chairs →
Work chairs and sit-stand stools
All work chairs →
Industry 9633
Seat height 45 – 60 cm · on twin castors
Work chair for production, engineering and the workshop. Synchronous mechanism with weight adjustment and a pre-shaped Skintec seat.

Industry 9631
Seat height 57 – 83 cm · footring · glides
The high version, for standing workstations and high work tables. Comes as standard on glides; seat-stop castors are also possible.

Charly LX008
Sit-stand stool · 45 – 63 cm · 5.34 kg
Stool of biobased plastic with a seat cushion of biobased TPE with a cork filling. Adjust and carry it by the textile strap.
The two Industry models are the same chair in two seat heights. The low one stands on castors and fits under a normal workbench; the high one stands on glides and has a footring, so it does not roll away when someone half stands on it.
All seven models side by side
To the collection →| Model | Group | Backrest and seat | Mechanism | Seat height | Armrests | Standards |
|---|---|---|---|---|---|---|
| Kai LX006 | Meeting chair | upholstered seat and backrest on a plastic back shell | seat height adjustment | 41 – 53.5 cm | fixed | EN 16139 |
| Nova LX007 | Meeting chair | upholstered seat and backrest on a plastic back shell | sled frame, steel Ø 22 mm, stackable in fours | 45 cm | fixed | EN 16139 |
| Anne's counter LX001 | Counter chair | upholstered backrest of 52.5 cm, height-adjustable | lockable synchronous mechanism with weight adjustment | 58.5 – 77 cm | 2D, height and width | NEN-EN 1335 |
| Julian's counter LX002 | Counter chair | mesh backrest, height-adjustable | lockable synchronous mechanism with weight adjustment | 58.5 – 77 cm | 4D T armrests with soft pad | NEN-EN 1335 |
| Industry 9633 | Work chair | plastic back shell, pre-shaped Skintec seat | synchronous mechanism with weight adjustment | 45 – 60 cm | 4D optional | DIN 68877 |
| Industry 9631 | Work chair | plastic back shell, Skintec seat, footring | lockable synchronous mechanism with weight adjustment | 57 – 83 cm | 4D optional | DIN 68877 |
| Charly LX008 | Sit-stand stool | seat cushion of biobased TPE with a cork filling | height adjustment with the textile strap | 45 – 63 cm | – | EN 16139 |
Data from the manufacturer: Se7en for the LX models, Bimos for the Industry 9631 and 9633. Both brands belong to the Interstuhl group. All models carry the GS symbol for tested safety.
Other Se7en groups
Looking for something else from the same brand? The ordinary office chairs are at Se7en office chairs, with the Comfort, Pro and Premium lines side by side. There you will also find the Anne LX111 and the Julian LX212, the models the two counter chairs on this page are derived from.
Would you like to see the whole brand first? On the Se7en brand page we explain how the lines relate to one another. Or compare more widely: all meeting chairs and all work chairs in our webshop, from other brands too.
Why buy your Se7en from us
The chair comes from the Interstuhl group. The interior is our work.
- On-site advice, and a free 2D or 3D floor plan of your space
- Delivery and assembly by our own fitters
- One point of contact from the first conversation to handover
- 1,000 m² showroom in Moordrecht, where you can try the furniture out yourself
- We take in old furniture for reuse

A proposal for your Se7en chairs
Tell us how many chairs are involved and where they will stand — meeting room, counter or workshop. Then we choose the right model and the right fabric group, with a floor plan and without obligation.
A word on upholstery, standards and warranty
On the meeting chairs and the counter chairs the fabric group determines the price, not the colour. Lucia is a polyester of more than 100,000 Martindale and is in stock in black; Remix and Steelcut Trio 3 come at a surcharge and to order. The Industry work chairs are upholstered in Skintec, which you can wipe down, wash and disinfect — which is why they are also found in laboratories and cleanrooms.
The meeting chairs and the Charly comply with EN 16139 for visitor chairs, the two counter chairs with NEN-EN 1335 for office chairs and the Industry work chairs with DIN 68877. All models carry the GS symbol for tested safety. Se7en gives a seven-year factory warranty on its own models. In addition we give a five-year BNR warranty on the delivery and the assembly. In the Se7en meeting, counter and work chairs collection you will find the price and all versions for each model.
The range: Se7en meeting, counter and work chairs
7 items












