ROFA Acoustic walls
ROFA · Acoustic walls
ROFA acoustic walls and desk screens
From a screen on the desk to a wall that reaches up to the ceiling. ROFA makes them in the Netherlands, upholstered in the fabric and colour you choose.
Calm on the work floor, without building work
In an open office, sound bounces in all directions. An acoustic wall catches part of that and gives the workstation a back. Most walls do not have to be screwed into the floor or ceiling, so you move them when the layout changes.
ROFA started in 1991 with industrial furniture upholstery. You can see it: every wall is upholstered in the fabric and colour you choose. The lead time is four to six weeks.
On and at the desk
All acoustic walls →
Packman desk partition
40 cm high · 70 or 80 cm wide
You clamp it onto the top, up to a top thickness of 4.5 cm. You choose the fabric and colour yourself.
Desk Up
3 or 5 cm thick
Turns a duo workstation into two full workstations. With the order you supply a drawing with the centre-to-centre dimension of the pins.
Desk Up Fly (Fly By)
3 or 5 cm thick
You decide for yourself how high the wall comes below or above the top. Calm at the side of the workstation.
Between the workstations and free-standing
View all versions →
Goalpost wall
Top edge 100 to 135 cm, in steps of 5 cm
Stands on its own height-adjustable frame. A sit-stand desk goes up and down, the wall stays put. Cables run underneath.
Acoustic wall on T-base
100, 115 or 135 cm high · 6.5 cm thick
Free-standing, without fixing to floor or ceiling. Also available 5 cm thick.
Mobile acoustic wall
Various heights and widths
On castors, so you put it where it is needed at that moment. Fabric and colour of your choice.
Separate linking wall
On two feet
Fills the gap between two existing walls. That way you make one continuous wall from separate panels, without a gap.
Bilding acoustic wall
Complete Fabricks set, bespoke configuration as per quotation
A complete wall, entirely of your own making. Built up around aluminium poles, through which power and data cables can run. With 90° corner blocks you set up an L or U shape.
Roomdivider
6.5 cm thick · to just below the ceiling
Divides a space into zones, without screwing into floor or ceiling. Also available with a recessed magnetic whiteboard.
Wall configurations, L to U
All configurations →
L configuration
1 workstation · left or right
Two panels at right angles to each other. You work in peace and are screened off on one side.
T configuration
2 workstations
Three panels in a T shape, for two workstations.
X configuration
4 workstations
Four panels crosswise, for four workstations.
H configuration
2 workstations
Two side panels with a cross panel between them, for two workstations. Each with their own spot.
H configuration open
Workstation 120 to 180 × 80 or 90 cm
Open at the legs, so calm without a closed corner. T-feet and connectors included.
U configuration
1 workstation
A back panel with two side panels, around a single workstation.
U configuration open
1 workstation
Two side panels with a half-height back panel. Open at the feet, so more spacious.
Which wall for which situation
Clamped onto the desk. You clamp the Packman desk partition onto the top. Desk Up goes between the two tops of a duo workstation. You fix Fly By to the desk, as high or as low as you like.
Between desks, on its own frame. The Goalpost and the wall configurations stand clear of the desk. With sit-stand desks the wall therefore stays at the same height, however high or low someone works.
Free-standing. The wall on a T-base, the mobile wall and the Bilding (a complete Fabricks set) you place where it is needed, and move again when the layout changes. The linking wall makes one whole of it.
Up to the ceiling. The Roomdivider reaches to just below the ceiling, so that the sound does not carry over the wall. Without a suspended ceiling it is anchored into the structural ceiling.
View all walls →Dimensions, thicknesses and fabric
The wall configurations and the wall on a T-base are 100, 115 or 135 cm high and 6.5 cm thick as standard; on request ROFA makes them 5 cm. They are upholstered wooden sandwich constructions, filled on both sides with acoustic material of absorption class A. Invisible connectors hold the panels together, without fixings.
Desk Up and Fly By are available as an upholstered wooden panel with a honeycomb core of 3 cm or as an acoustic sandwich wall of 5 cm. You set the Goalpost in steps of 5 cm, from 100 to 135 cm. On the open H configuration the fabric is your choice, with T-feet in white, black, silver grey or anthracite.
For Desk Up, Fly By, the Goalpost, the wall on a T-foot, the wall configurations and the Roomdivider, ROFA states a sound absorption of the material used of Aw 0.90 and a reaction to fire of Euroclasse A1 (EN 13501-1). The wood is sustainably certified.
View the walls collection →
Related ROFA lines
Acoustic panels
Wall, cabinet and ceiling
Wall panels, cabinet panels, ceiling panels, AkoestiekA and separate Fabricks Bricks to build or extend yourself.
ModuWall and Moduplus
10 cm thick · 100 to 240 cm high
ModuWall links without tools into walls, corners and alcoves. It is part of Moduplus, with M+ Room and the phone booths.
Why buy ROFA from us
ROFA makes it in the Netherlands. The interior is our work.
- On-site advice, and a free 2D or 3D floor plan of your space
- Delivery and installation by our own fitters
- One point of contact from the first conversation through to handover
- 1,000 m² showroom in Moordrecht, where you can try the furniture out yourself
- We take back old furniture for reuse
A proposal for your acoustic walls
Tell us how many workstations there are and what the space looks like, and we will put the walls together for you — with a floor plan, and without obligation.
A little more about ROFA
ROFA makes acoustic solutions, Moduplus, soft seating and chairs, and produces 100% energy-neutrally. You can read more about the brand on the ROFA brand page. In the acoustic walls collection you will find every version. Would you first like to know which wall your space needs? Send a floor plan along and we will take a look with you.
Frequently asked questions
Yes, lease and financing are also available for self-employed professionals (ZZP'ers) and sole proprietorships, provided you meet the creditworthiness requirements.
With operational lease, you can choose to return, extend, or purchase the asset at its residual value. With financial lease, you automatically become the owner.
All costs are communicated clearly in advance. There are no hidden fees.
This depends on the type of financing and the terms and conditions. We would be happy to discuss this with you.