Skip to content

Cart

Your cart is empty

System walls

Glass system walls between office spaces

System walls

Dividing your office structurally into rooms

System walls divide your office structurally into meeting rooms, executive offices and quiet rooms: fixed walls that run from floor to ceiling, including doors and frames. We take care of the measuring up, the design and the installation as part of your project furnishing.

What a system wall is

A fixed wall, built up from a system

A system wall runs from floor to ceiling and is therefore structural work: the space behind it becomes a real room, with its own door and frame. That is the difference from a separate partition or room divider, which only marks a zone. As soon as you want a meeting room, an executive office or a quiet room that can also be closed, you end up with a system wall.

The wall is built up from profiles with an infill: glass, solid panels or a combination of the two. Because it is a system and not brickwork or plasterwork, the layout can be adapted at a later rearrangement instead of being demolished. The division between glass and solid determines how much daylight carries through and how much the rooms screen each other off.

We tackle this as part of the project furnishing: measuring up, design, installation and handover all go via the same adviser, so that wall, floor, wall finish and furniture match each other. If you are looking for a solution without building work, then look at partitions without building work or at acoustics and room dividers.

In brief
Floor to ceilingGlass, solid or a combinationDoors and framesMeasuring up on siteFree 3D designOur own installation teamPart of project furnishing
Wall types

What you choose from

Glass partitions

Fixed glass walls keep daylight in the space and give meeting rooms and executive offices an open look. Can be executed with film or lettering when you want more privacy.

Solid and combination walls

Solid panels screen rooms off and limit the sound transmission between rooms. Combined with strips of glass you keep the incoming light and still get a screened workstation.

Doors and frames

Hinged and sliding doors in matching frames complete the wall. We match the openings to the walking routes and to the existing doors in the building.

Connection to the building services

A wall touches the ceiling, the floor and the building services. We include lighting, ventilation and electrics when measuring up, so that the new rooms are workable and do not end halfway across a ceiling grille.

Layout and walking routes

The number of rooms, the position of the doors and the division between glass and solid follow from your work processes. That keeps the walking routes logical and leaves the open floor enough daylight.

Can be changed later

Because the wall consists of profiles and panels, a rearrangement can be made later without demolition work. Handy with growth, downsizing or a different division of the departments.

Applications

Which spaces you create with it

X-Pod meeting pod in an open-plan office, with an anthracite bench set and glass walls behind which four people are meeting

Meeting rooms and consulting rooms

Glass with film or lettering · door on the walking route

The most requested application: a lockable space in which meetings and video calls no longer carry across the work floor. Glass walls keep the daylight and the sight lines intact, film or lettering gives the privacy a consulting room needs. In the design we determine the number of rooms and the position of the doors.

Mood image of a T45 executive office with a straight desk in light wood and a bookcase wall

Executive offices and closed offices

Solid panels or a combination wall · sound transmission limited

For an executive or management room, screening matters more than seeing through. A solid or combined wall limits the sound transmission between rooms, while strips of glass keep the room from becoming a box. We place cabinets and bespoke work in the same plan, so that the wall and the interior are designed together.

Mood image of a russet upholstered phone booth with two benches, a table and a screen by a window

Quiet rooms and concentrated work

A small lockable space · alternative: a separate phone booth

A quiet room from floor to ceiling gives a permanent place to make calls or work with concentration. If you do not want structural work or the place has to be able to move with you, a separate phone booth is the alternative: it is placed and can be removed again later.

Bench configuration with a terracotta upholstered acoustic partition between two workstations

Or without building work after all

Separate walls and room dividers · no door, no frame

Not every division calls for a structural wall. If you only want to mark zones, take away views or dampen sound on the work floor, a separate partition or room divider is enough. You move it yourself and you need no work on ceiling and floor for it. On the pages below you can read when each variant fits.

This is how the installation goes

Four steps from measuring up to handover

1

Measuring up and structural situation

We measure up the space and look at the ceiling, floor and columns. We also include the connection to lighting, ventilation and electrics in this.

2

Design and layout

Based on your work processes we determine the number of rooms, the positions of the doors and the division between glass and solid panels. You receive a 3D design.

3

Placement

Our own installation team erects the walls, frames and doors. Work on the ceiling and floor is part of that.

4

Handover

We go through the work with you, adjust doors where necessary and remove the packaging material. After that the space is ready to be put into use.

Why BNR

Four things that make the difference

One point of contact

From measuring up to handover the same adviser keeps the project in hand, also when wall, floor and furniture come together in one project.

Our own installation team

Our fitters place the walls themselves and work in phases, so that your organisation can keep working during the building work.

Design in advance

You get free interior advice and a 3D design, so that you see the new layout before anything is placed.

Over 35 years of expertise

From Moordrecht we furnish offices, from a single meeting room to a complete floor. In our 1,000 m² showroom at Westbaan 170 you go through the possibilities.

35+ years of expertise
One point of contact
Free 3D design
Our own installation team
1,000 m² showroom

Would you like to know how system walls would work out in your building? Request a bespoke design or call 010 - 753 60 40.

Frequently asked questions

Yes, lease and financing are also available for self-employed professionals (ZZP'ers) and sole proprietorships, provided you meet the creditworthiness requirements.

With operational lease, you can choose to return, extend, or purchase the asset at its residual value. With financial lease, you automatically become the owner.

All costs are communicated clearly in advance. There are no hidden fees.

This depends on the type of financing and the terms and conditions. We would be happy to discuss this with you.