Skip to content

Cart

Wide Actiforce Steelforce desk with a long white top on white T-legs, seen from the short side

Actiforce · the Steelforce range

Actiforce Steelforce sit-stand desks

The Steelforce range is Actiforce's steel line: 120 kg dynamic load capacity on the two-leg frames and 150 kg on the three-leg frames. We supply ten versions, from a square top of 80 x 80 cm to a continuous top of 320 cm.

Dutch brand Free 2D/3D floor plan Delivery & assembly by us Showroom in Moordrecht 5-year warranty

Ten versions, four frame families

We call the Steelforce range by the SF numbers, and those numbers refer to the base, not to the top size. Four families, each with its own reason to choose it.

The SF 400 is the entry model and the desk we supply most often: two-stage columns of 70 x 70 mm, 61.5 to 122.5 cm, T-legs with a cross rail between them. The SF 370 is the fixed workstation with four top sizes, and goes down to 69 cm; the SMALL is the same technology under a square top on a star base.

The SF 670 is the widest family: seven versions with two-stage columns of 60 x 90 mm and an adjustment range of 61.5 to 127.5 cm. The straight desk and the bench stand on two legs and carry 120 kg. The versions with a third leg — the L and XL size, the right-angled corner desk and the settings at 120 and 135 degrees — stand on Actiforce's three-leg frames (SLS 67X Pro and SLS 671 Pro) and carry 150 kg.

Everything in this range adjusts electrically with a spindle drive in the columns, with the control under the top, and with a soft start and soft stop. The heights you see here are the frame heights that Actiforce states, so without a top and with a tolerance of ± 1 cm; for the height of the work surface add the 25 mm of our top.

Electric sit-stand desk SF 670 with a light grey top on a black T-frame, seen from the front at an angle

What 120 and 150 kg mean

For its frames Actiforce states the dynamic load capacity: what the base may lift while it is moving. That is the figure you need, because a desk that is fully loaded also has to go up.

For the two-leg Steelforce frames that is 120 kg: the SF 370, the SF 400, the straight SF 670 and the duo desk. In practice two or three screens on a monitor arm, a docking station, a laptop stand and everything else that accumulates over the course of a week go on there without any trouble.

For the frames with three legs Actiforce states 150 kg, the highest figure in our range. Those are the SF 670 L and the SF 670 XL — which stand on the same frame, in the 180° setting — and further the right-angled corner desk SF 670, the corner desk at 135 degrees and the version at 120 degrees.

Actiforce further states per frame an adjustment speed of 39 mm/s on the two-leg frames and 30, 40 or 60 mm/s adjustable on the three-leg frames, a noise level of less than 50 dB(A) on the SF 370 and the SF 400, and less than 55 dB(A) on the SF 670 family, and collision detection on the SF 400, the SF 670, the duo desk, the L and XL and the corner versions. Those figures are now in the table below.

View the whole Steelforce range →

The ten versions side by side

To the collection →
Model Frame height Adjustment speed Noise Load capacity Collision detection Top sizes Base Frame colours
SF 400 61.5 – 122.5 cm 39 mm/s < 50 dB(A) 120 kg dyn. Fitted 120 x 80, 140 x 80, 160 x 80 cm T-leg with cross rail 3
SF 370 69 – 118 cm 39 mm/s < 50 dB(A) 120 kg dyn. — 120 x 80 to 180 x 80 cm T-leg 3
SF 370 SMALL 69 – 118 cm 39 mm/s < 50 dB(A) 120 kg dyn. — 80 x 80 cm Star base 3
SF 670 61.5 – 127.5 cm 39 mm/s < 55 dB(A) 120 kg dyn. Fitted 120 x 80 to 200 x 100 cm T-leg 3
SF 670 L 61.5 – 127.5 cm 30, 40 or 60 mm/s < 55 dB(A) 150 kg dyn. Anti-Collision Gyro Sense 220 x 80 to 240 x 100 cm T-leg, 3 legs 3
SF 670 XL 61.5 – 127.5 cm 30, 40 or 60 mm/s < 55 dB(A) 150 kg dyn. Anti-Collision Gyro Sense 260 to 320 cm, 80 or 100 cm deep T-leg, 3 legs 3
Corner desk SF 670 61.5 – 127.5 cm 39 mm/s < 55 dB(A) 150 kg dyn. Fitted 180 x 80 + 80 x 60 or 100 x 60 cm, or Wing 180 x 120 cm T-leg, 3 legs 3
Corner desk SF 670 135° 61.5 – 127.5 cm 30, 40 or 60 mm/s < 55 dB(A) 150 kg dyn. Anti-Collision Gyro Sense 216 cm, at 135° T-leg, 3 legs 3
SF 670 120° 61.5 – 127.5 cm 30, 40 or 60 mm/s < 55 dB(A) 150 kg dyn. Anti-Collision Gyro Sense 120 x 120 x 80 and 140 x 140 x 80 cm T-leg, 3 legs 3
Duo desk SF 670 61.5 – 127.5 cm 39 mm/s < 55 dB(A) 120 kg dyn. Fitted 120 x 80 to 200 x 80 cm H-leg 3

Figures from the spec sheets, manuals and product pages of Actiforce, checked on 25 September 2026. Frame heights are without a top, with a tolerance of ± 1 cm; for the height of the work surface add 2.5 cm. The L, the XL and the three corner versions stand on the three-leg Actiforce frames (SLS 67X Pro and SLS 671 Pro) with 150 kg; the remaining versions on a two-leg frame with 120 kg. All ten versions are electrically adjustable with the control under the top, have a top of 25 mm in eight colours and a frame in aluminium, black or white.

One frame, four corner settings

The frames with three legs in this range are not fixed to one angle. They can be built at 90°, 120°, 135° and 180° — Actiforce states the angle adjustment of this frame as infinitely variable, with a degree kit per setting. We supply it as a corner desk at 135 degrees, as a version at 120 degrees and, in the 180° setting, as the straight SF 670 L and SF 670 XL with a third leg in the middle.

That makes a difference when you reorganise. If the department moves to a room where the workstation has to sit in the corner the other way round, it is a matter of building the frame differently and putting another top on it — not a new desk.

Which angle for what? 135 degrees is the shallowest and therefore the calmest for two or three screens: you reach the outer screens by turning your chair instead of your whole upper body. 120 degrees sets the work surface more tightly around you and is the choice if everything has to be within arm's reach. In the 180° setting Actiforce states a width of 225.7 to 345.7 cm — that is the range our L and XL fall in.

View the corner desk at 135° →
Electric corner desk SF 670 135 degrees with a white top on a black T-frame

Controls, memory settings and certificates

The Steelforce frames are operated with an ActiSwitch switch under the top. On the SLS 670 Pro frame Actiforce supplies the ActiSwitch Eco-Memory with it, with three preferred heights that you call up with one button; the three-leg SLS 67X Pro frame is supplied with the same handset. There is also an ActiSwitch Pro Memory, and a Memory Master with a display that shows the height: you fix a setting with the SAVE button, after which the power unit confirms it with a double click. The duty cycle of the SLS frames is 10 per cent — 2 minutes on, 18 minutes off.

Certificates: the SLS 670 Pro frame, the SLS 670 Bench Pro frame and the SLS 67X Pro frame — the last of these sits under the L, the XL and the corner versions — are CE and UKCA certified, ETL Listed and Green Tag Certified. The SLS 670 Pro frame has in addition been tested to the Japanese national standard by TÜV Rheinland and to IEC 60335-1 by Intertek; the SLS 67X Pro frame and the Steelforce Pro 370 SLS frame to IEC 60335-1 by Intertek.

The frame is built up from powder-coated steel: legs, feet, top supports and cross beams. On the Steelforce 400 the cross rail is of galvanised steel. The three-leg frames have feet of 2 x 750 mm and 1 x 600 mm. No frame has a built-in socket; a cable tray is an option on every frame.

Related pages

The full Actiforce programme we carry is on the Actiforce brand page. The lighter aluminium line is on Actiforce AF.

Looking for desks from several brands side by side? Then take a look at the collections sit-stand desks (electric), corner desks, duo workstations and cable management. An overview of all brands is on the page brands.

Why buy Steelforce from us

The base comes from Actiforce. The interior is our work.

  • Advice on site, and a free 2D or 3D floor plan of your space
  • Delivery and assembly by our own fitters
  • One point of contact from the first conversation through to handover
  • 1,000 m² showroom in Moordrecht, where you can try the furniture yourself
  • We take in old furniture for reuse
Plan a showroom visit →
Duo desk entirely in white: white base with two white work surfaces at different heights

A proposal with Steelforce desks

Tell us which room it is for and how many workstations you are looking for. Then we choose the version, the top size and the colour — with a floor plan, and without obligation.

✓ Thank you! Your request has been sent. We usually get in touch within one business day.
Something went wrong while sending. Do call us on 010 - 753 60 40 or email info@bnrkantoor.nl.

We reply within one business day. This page is protected by hCaptcha; its privacy policy and the terms of use apply.

Tops, cables and warranty

On all ten versions the top is 25 mm thick, in eight colours: Lindberg oak, mid oak, natural oak, brown oak, American walnut, concrete look, light grey and white. You choose the frame in aluminium, black or white. A screen never shows a decor exactly; if in doubt, ask for a sample.

On a desk that goes up and down you want the cables to move with it. Actiforce supplies the cable tray as an option on all its frames and does not build a socket into the frame. Whatever suits your version — a cable tray under the top, a cable drawer or a cable spiral along the leg — we put in the proposal and fit during assembly; the separate range is under cable management. On Actiforce you get a 5-year warranty from us.

The adjustment speed, the noise level and the collision detection are in the table above per model, and the controls, the memory settings and the certificates in the explanation below it.