Actiforce · Dutch brand
Actiforce sit-stand desks
Actiforce makes height-adjustable bases for desks, and nothing else. We supply fifteen desks on those bases: straight, as a corner desk, as a bench or with a continuous top up to 320 cm. With advice, a floor plan and assembly.
One manufacturer, two ranges
Actiforce is a Dutch brand — Actiforce International B.V. in Bunschoten-Spakenburg — that has devoted itself entirely to sit-stand systems: the telescopic columns, the drive and the frames on which a work surface goes up and down. According to Actiforce's manuals the frames themselves are produced in Malaysia. The top, the colour and the size you choose alongside; those we supply.
The programme we carry falls into two ranges. The Steelforce range — the SF numbers with us — has a steel base and is the heavier of the two: 120 kg dynamic load capacity on the two-leg frames and 150 kg on the three-leg frames, with an adjustment range that on most models starts at 61.5 cm. The AF range has a lighter aluminium base: 60 or 80 kg, and with that the more affordable alternative for an ordinary workstation.
Anyone without a power point in the right place can turn within the AF range to the AF 110: the same layout, but with a hand crank instead of a motor. Everything else we carry from Actiforce is electric, with the control under the top.
Below you will first find the two ranges with a page of their own, then a short explanation per series, a selection guide and a table with the technical data Actiforce states per frame.

Who Actiforce is
Actiforce is a Dutch brand of height-adjustable bases for desks and tables. The company does not make complete office interiors: it makes the moving part underneath. We put our own tops on it and sell the whole under our own type numbers.
The programme is split across two material groups, and that split is in the name as well: Steelforce for the steel bases and Aluforce for the aluminium ones. With us those are the SF and the AF numbers.
Actiforce states its heights as frame height, so without a top — and that is how they appear on our pages too. If you want to know what you will measure from the floor to the work surface, add the 25 mm of the top: 2.5 cm on top of the lower and the upper limit. Actiforce works with a tolerance of ± 1 cm.
The load capacity Actiforce publishes is the dynamic load rating: what the frame may lift while it is moving, not what may stand still on it. That is the figure you need, because a desk that is fully loaded also has to go up. On the two-leg Steelforce frames that is 120 kg; on the three-leg frames — the SF 670 L and XL and all corner versions — 150 kg. On the AF 110, AF 140 and AF 150 it is 60 kg and on the AF 250 80 kg.
On Actiforce we give a 5-year warranty.
View all Actiforce desks →The two ranges
Everything from Actiforce →
Steelforce range (SF)
10 items · SF 370, SF 400 and SF 670
Steel base, 120 kg dynamic on the two-leg frames and 150 kg on the three-leg frames. From a square top of 80 x 80 cm to a continuous top of 320 cm, plus corner desks and a bench.

AF range
5 items · AF 110, AF 140, AF 150 and AF 250
Aluminium base, 60 or 80 kg. Four electric desks and one with a hand crank, in top sizes from 120 x 80 to 180 x 80 cm and as a corner desk.
The series explained briefly
All Actiforce models →
SF 370
69 – 118 cm · 120 kg · also as SMALL
The workhorse for a fixed workstation, with tops from 120 x 80 to 180 x 80 cm. The SMALL is the same technology under a square top of 80 x 80 cm on a star base, for a corner or a home workstation.

SF 400
61.5 – 122.5 cm · 120 kg · three top sizes
Our entry model with the full range downwards, and the desk we supply most often. Two-stage columns, T-legs with a cross rail between them.

SF 670
61.5 – 127.5 cm · straight, L, XL, corner, 120°, 135° and duo
The widest series: seven versions on the same column size. Straight up to 200 x 100 cm, as L and XL up to 320 cm, right-angled or at 120 and 135 degrees, and as a bench with two tops that adjust separately.

SF 670 L and XL
220 – 320 cm · 150 kg · three legs
For tops that fall outside the standard sizes. Besides the two legs at the ends there is a third in the middle, which supports the top across the full width — and that three-leg frame carries 150 kg dynamic.

AF 110 and AF 150
68 – 114 cm · 60 kg · cross beam
The same base with a cross beam between the legs, which makes it stiffer. The AF 110 adjusts with a hand crank and therefore needs no socket; the AF 150 does it electrically.

AF 140 and AF 250
70 – 116 or 63 – 128 cm · clear space under the top
Two electric desks without a cross beam, so with the full width under the top clear. The AF 250 is the heaviest of the AF range at 80 kg and with the widest range; of the AF 250 there is also a corner desk.
Three ways to make a corner
A corner workstation can be done in three ways, and the difference is in the top. On the corner desk SF 670 a separate side top of 80 x 60 or 100 x 60 cm comes next to a work surface of 180 x 80 cm, left or right. That is the most affordable solution and there is a seam in the corner.
With the Wing version of that same corner desk it is one continuous top of 180 x 120 cm: 80 cm deep across the full width, with a rounded run-out at the side up to 120 cm. No seam, and a softer line.
The third way is to set the top at an angle instead of building onto it: the corner desk SF 670 at 135° with one top of 216 cm, or the SF 670 at 120° in 120 x 120 x 80 or 140 x 140 x 80 cm. Both stand on a frame with three legs and 150 kg load capacity. That frame can also be built at 90 and 180 degrees — in the 180° setting it is exactly the base under our SF 670 L and XL.
In the AF range there is one corner solution: the corner desk AF 250 with an attached side top.
View all corner desks →
Selection guide: which Actiforce suits your situation?
To the collection →| Your situation | What we recommend | Why |
|---|---|---|
| A fixed workstation, standard size, budget first | SF 400 | 61.5 to 122.5 cm and 120 kg dynamic on our entry model; tops 120 x 80 to 160 x 80 cm |
| Workstation used by different people | SF 670 | Lower limit 61.5 cm, so low enough for practically any body height |
| A corner or a wall where 160 cm will not go | SF 370 SMALL | Square top of 80 x 80 cm on a star base in the middle, electric from 69 to 118 cm |
| Standard desk of 120 to 180 cm, no special requirements | SF 370 | Four top sizes, 120 kg dynamic, control on the top |
| Director's office, drawing workstation or three screens side by side | SF 670 L or SF 670 XL | 220 to 240 cm and 260 to 320 cm respectively, with a third leg in the middle against sagging; 150 kg dynamic |
| Two workstations back to back in an open-plan office | Duo desk SF 670 | One base, two tops that adjust separately; one person can stand while the other sits |
| Corner layout, as affordable as possible | Corner desk SF 670 | 180 x 80 cm with side top 80 x 60 or 100 x 60 cm, left or right; 150 kg dynamic |
| Corner layout with no seam in the work surface | Corner desk SF 670 135° or SF 670 120° | One continuous top of 216 cm at 135°, or 120 x 120 x 80 and 140 x 140 x 80 cm at 120° |
| A single workstation, lightly loaded, space under the top clear | AF 140 | T-leg without cross beam, 70 to 116 cm, 60 kg; a pedestal and a waste bin fit underneath |
| Workstation where the base has to be extra stiff | AF 150 | Cross beam between the legs; also two centimetres lower than the AF 140, from 68 cm |
| Room with no power point in the right place | AF 110 | Adjusting with a hand crank, so no cable and no electronics that can fail |
| An AF desk that has to carry more and adjust further | AF 250 or the corner desk AF 250 | 80 kg dynamic and a range of 63 to 128 cm; the corner desk with a side top of 80 x 60 or 100 x 60 cm |
In doubt between two models? Let us know your space and the number of workstations; then we will put both versions with dimensions in a proposal. All top sizes and colours per model are on the product page.
What Actiforce states per frame
To the collection →| Our model | Actiforce frame | Frame height | Stroke | Adjustment speed | Noise | Load capacity | Collision detection | Column and system |
|---|---|---|---|---|---|---|---|---|
| SF 370 and SF 370 SMALL | Steelforce Pro 370 SLS | 69 – 118 cm | 49 cm | 39 mm/s | < 50 dB(A) | 120 kg dyn. | — | 70 x 70 mm, single-stage spindle |
| SF 400 | Steelforce 400 | 61.5 – 122.5 cm | 61 cm | 39 mm/s | < 50 dB(A) | 120 kg dyn. | Fitted | 70 x 70 mm, two-stage spindle |
| SF 670 | SLS 670 Pro | 61.5 – 127.5 cm | 66 cm | 39 mm/s | < 55 dB(A) | 120 kg dyn. | Fitted | 60 x 90 mm, two-stage spindle |
| SF 670 L and SF 670 XL | SLS 67X Pro in the 180° setting, three legs | 61.5 – 127.5 cm | 66 cm | 30, 40 or 60 mm/s, adjustable | < 55 dB(A) | 150 kg dyn. | Anti-Collision Gyro Sense | 60 x 90 mm, two-stage spindle |
| Duo desk SF 670 | SLS 670 Bench Pro | 61.5 – 127.5 cm | 66 cm | 39 mm/s | < 55 dB(A) | 120 kg dyn. | Fitted | 60 x 90 mm, two-stage spindle |
| Corner desk SF 670 | SLS 671 Pro 90°, three legs | 61.5 – 127.5 cm | 66 cm | 39 mm/s | < 55 dB(A) | 150 kg dyn. | Fitted | 60 x 90 mm, two-stage spindle |
| SF 670 120° and 135° | SLS 67X Pro, three legs | 61.5 – 127.5 cm | 66 cm | 30, 40 or 60 mm/s, adjustable | < 55 dB(A) | 150 kg dyn. | Anti-Collision Gyro Sense | 60 x 90 mm, two-stage spindle |
| AF 110 | Aluforce Pro 110 HC | 68 – 114 cm | 46 cm | 6 mm per crank turn | Not applicable | 60 kg dyn. | Not applicable | 132 x 54 mm, hand crank |
| AF 140 | Aluforce Pro 140 M | 70 – 116 cm | 46 cm | ± 23 mm/s | < 50 dB(A) | 60 kg dyn. | Fitted | 132 x 54 mm, single-stage, external drive |
| AF 150 | Aluforce Pro 150 M | 68 – 114 cm | 46 cm | ± 24 mm/s | < 50 dB(A) | 60 kg dyn. | Fitted | 132 x 54 mm, single-stage, external drive |
| AF 250 and corner desk AF 250 | Aluforce Pro 250 M and 251 M 90° | 63 – 128 cm | 65 cm | ± 31 mm/s | < 50 dB(A) | 80 kg dyn. | Fitted | 154 x 63 mm, two-stage, external drive |
Figures from the spec sheets, manuals and product pages of Actiforce, checked on 25 September 2026. Frame heights are without a top, with a tolerance of ± 1 cm; for the work surface height add 2.5 cm. The SF 670 L and XL and all corner versions stand on Actiforce's three-leg frames with 150 kg; in the 180° setting Actiforce states a width of 225.7 to 345.7 cm for that frame. All electric frames run on 220 – 240 V (AF frames 100 – 240 V) and have a soft start and soft stop; the duty cycle is 10 per cent — on the SLS frames 2 minutes on and 18 minutes off, on the AF frames 1 minute on and 9 minutes off. No frame has a built-in socket; a cable tray is an option on every frame.
Controls, memory settings and certificates
The electric frames are operated with an ActiSwitch switch under the top. On the SLS 670 Pro Actiforce supplies the ActiSwitch Eco-Memory with it: it stores three preferred heights, which you call up again with one button. The three-leg SLS 67X Pro frame — under the L, the XL and the corner versions — gets the same handset. There is also an ActiSwitch Pro Memory, and for the SLS frames a Memory Master with a height readout on a display — there you fix a height with the SAVE button, after which the power unit confirms it with a double click.
Collision detection is on most frames: Actiforce states it as fitted for the SLS 670 Pro, the SLS 670 Bench Pro, the SLS 671 Pro, the SLS 67X Pro, the Steelforce 400 and all electric Aluforce frames. On the SLS 67X Pro — so on our L, XL and the versions at 120 and 135 degrees — the system is called Anti-Collision Gyro Sense. On the hand-crank AF 110 collision detection does not apply: there is no motor that has to be stopped.
Certificates per frame: the SLS 670 Pro, the SLS 670 Bench Pro and the SLS 67X Pro are CE and UKCA certified, ETL Listed and Green Tag Certified. The SLS 670 Pro has in addition been tested to the Japanese national standard by TÜV Rheinland and to IEC 60335-1 by Intertek; the SLS 67X Pro and the Steelforce Pro 370 SLS to IEC 60335-1 by Intertek. For the Aluforce Pro 150 M Actiforce publishes a TÜV SÜD, ETL, UL, FCC, LVD and EMC certificate, for the Aluforce Pro 250 M a TÜV, ETL and LVD certificate and for the Aluforce Pro 140 M an LVD and EMC certificate.
The drive system differs per range: the Steelforce and SLS frames have a spindle drive in the columns, the Aluforce frames an external drive under the top.
Related pages
The two ranges each have their own page: Actiforce Steelforce and Actiforce AF.
Looking for desks from several brands side by side? Then take a look at the collections sit-stand desks (electric), corner desks, duo workstations and cable management. An overview of all the brands we supply is on the page brands.
Why buy Actiforce from us
The base comes from Actiforce. The interior is our work.
- Advice on site, and a free 2D or 3D floor plan of your space
- Delivery and assembly by our own fitters
- One point of contact from the first conversation through to handover
- 1,000 m² showroom in Moordrecht, where you can try the furniture yourself
- We take in old furniture for reuse

A proposal with Actiforce desks
Tell us which room it is for and how many workstations you are looking for. Then we choose the range, the top size and the colour — with a floor plan, and without obligation.
A note on tops, cables and warranty
All desks we supply on an Actiforce base get a top of 25 mm in eight colours: Lindberg oak, mid oak, natural oak, brown oak, American walnut, concrete look, light grey and white. The frame comes in aluminium, black and white — except on the AF 110 and the corner desk AF 250, which we supply in aluminium only. A screen never shows a decor exactly; if in doubt, therefore, ask for a sample.
On a desk that goes up and down you want the cables to move with it. Actiforce supplies the cable tray as an option on all its frames and does not build a socket into the frame. Whatever suits your version — a cable tray under the top, a cable drawer or a cable spiral along the leg — we put in the proposal and fit during assembly. For the separate range take a look at cable management. On Actiforce you get a 5-year warranty from us.
The adjustment speed, the noise level, the collision detection, the controls and the certificates per frame are in the table above and in the explanation below it. In the Actiforce collection you will find the versions per model.
The range: Actiforce
15 items























