Mara sit-stand tables and benches
Mara · Sit-stand tables
Mara's Follow series adjusts in height without power. No motor, no plug and no cable to the floor: a patented mechanical system puts the top silently at the right height. Three models: a duo bench, a meeting table and a tilting table on castors.
Sit-stand without a socket
Almost every sit-stand table needs power. Mara does it differently: the Follow series works with a patented mechanical system. You release the adjustment under the top and set the table higher or lower in one movement. Mara states that the system works quickly and silently and needs no electricity.
That makes the difference in places where there is no socket or where the table moves regularly: a project room, an open-plan office, a training hall. You do not have to lay a floor duct and there is no power cable hanging from the table.
For the bench and the desk from this series Mara states the standard UNI EN 527 and for the tilting table UNI EN 15372.
The Follow series
All Mara sit-stand tables →
Follow Desk Bench
Duo workstation · 4 top sizes · 28 top colours
Two tops facing each other on one base, each separately adjustable by hand. From 2 x 120 x 80 to 2 x 180 x 80 cm. Base in two sizes (114 and 154 cm), moving columns in tri-chrome.

Follow meeting
Round or square · 4 to 8 people · 20 top colours
Meeting table on a heavy base plate. Round Ø 90 to 160 cm or square 80 x 80 to 100 x 100 cm, including the Break and Cone versions. Powder-coated steel frame, adjustment column in eco chrome.

Follow Tilting
Tilting · Mobile · Nesting
The top tilts up and the base rolls on swivel castors, so one person clears the hall. Mara states that a parked table takes up 16 cm of depth. 140 x 80, 160 x 80 or 180 x 80 cm.
The three models side by side
To the collection →| Model | Height adjustment | Controls | Top | Top sizes | People | Mobile | Tilting / nesting | Top colours | Frame colours | Weight |
|---|---|---|---|---|---|---|---|---|---|---|
| Follow Desk Bench | mechanical, without power | under the top | rectangle, two per base | 2 x 120 x 80, 2 x 140 x 80, 2 x 160 x 80 or 2 x 180 x 80 cm | 2 (duo workstation) | optional, four swivel castors Ø 75 mm with brake | – | 28 | 10 | – |
| Follow meeting | mechanical, without power | under the top | round or square | round Ø 90 to 160 cm, square 80 x 80 to 100 x 100 cm | 4 to 8 | – | – | 20 | 10 | – |
| Follow Tilting | mechanical, without power | under the top | rectangle | 140 x 80, 160 x 80 or 180 x 80 cm | 4 to 6 | yes, swivel castors | yes, tilting top; 16 cm per parked table (Mara's figure) | 28 | 10 | – |
A dash means we do not have this figure in our product data. Dimensions and colours per model are on the product page.

Tilting, rolling and putting away
The Follow Tilting is meant for halls that change function. The top tilts up until it stands vertical, the base rolls on swivel castors and the tables go one behind the other against the wall. Mara states that each parked table then takes up only 16 cm of depth, so a row of ten tables fits in a little over one and a half metres.
And because this table too adjusts mechanically, you do not have to pull out a plug when you rearrange. In a training layout you set the tables at seat height; for a short stand-up they go up.
The frame is of powder-coated steel in ten matt Mara colours, the adjustment column is finished in eco chrome. For this model Mara states the standard UNI EN 15372.
View the Follow Tilting →The duo layout of the Desk Bench
The Follow Desk Bench puts two workstations facing each other on one base. That saves space and legs: where two separate desks have eight legs, the bench stands on one frame. Both tops adjust separately, so one person can stand while the other sits.
The base comes in two sizes, 114 and 154 cm, and follows from the top size you choose: 2 x 120, 2 x 140, 2 x 160 or 2 x 180 cm, all 80 cm deep. The moving columns are finished in wear-resistant and environmentally friendly tri-chrome.
For the cables Mara supplies a cable tray under the top, cable grommets with a lid and power modules in the top. A CPU holder and acoustic dividing panels are in the Mara programme too. We put those options in the proposal.
Compare the versions →
Related pages
Would you like to see the whole brand first? On the Mara brand page we explain what Mara is good at. The flip-top and folding tables from the same brand are on Mara flip-top tables, and the column tables for the canteen and the coffee corner are on Mara canteen and standing tables.
Looking for tables from several brands? Then take a look at the collections canteen tables and bar tables and standing tables.
Why buy Mara from us
The table comes from Mara. The interior is our work.
- Advice on site, and a free 2D or 3D floor plan of your space
- Delivery and assembly by our own fitters
- One point of contact from the first conversation through to handover
- 1,000 m² showroom in Moordrecht, where you can try the furniture yourself
- We take in old furniture for reuse

A proposal for your sit-stand tables
Tell us how many tables you are looking for and for which room. Then we choose the right model, the top size and the colour — with a floor plan, and without obligation.
A note on tops, cables and warranty
The tops are melamine decors, split across top groups. On the bench and the Tilting you choose from 28 colours in three groups; on the Follow meeting from twenty colours in two groups. Top group 1 is held in stock, the other groups are produced to order and have a longer lead time. Colours on a screen differ from the actual decor; if in doubt, ask for a sample.
For the electrification Mara supplies cable grommets with a lid, a cable tray under the top, power modules in the top and a flexible cable spiral. We put those options in the proposal and fit them during assembly. On Mara you get a 5-year warranty from us. In the Mara sit-stand tables collection you will find the price and the versions per model.
The range: Mara sit-stand tables and benches
3 items






