Finishing & furnishing
Finishing and interiors
An office is more than desks and chairs. Five elements together determine the acoustics, the atmosphere and the look. This page gives the overview and refers you on for each element.
The finishing determines how an office works
If you only replace the furniture, the same complaints often remain: it echoes, there is too much or too little light, the sun shines on the screens and the floor makes every chair movement audible. Floor, wall, window coverings and lighting together determine most of the comfort in a room. That is why we treat them as one project and not as separate jobs one after another.
That means one colour scheme, one choice of materials and one schedule, with visualisation and sample cards. We include acoustics, lighting and maintenance in the design, not afterwards. We coordinate the work per project with regular partners — floor layers, painters, electricians and installers; installation and cable management are done by arrangement and on a project basis. You have one point of contact at BNR.
This topic covers five pages: wall finishing, floor coverings, window coverings, lighting and plants and greenery. Below you will find for each element a brief note on what it does and where to read more.
This is what a finished office looks like
Five rooms from offices we furnish. In each room, something different weighs most: reverberation, daylight, foot traffic or appearance.





Alongside the five topics
Acoustics and calm
We tackle reverberation with floor, walls and ceiling together, supplemented with room dividers, acoustic panels and enclosed spots for calls or meetings.
Layout with walls
System walls for fixed rooms and meeting rooms, movable partition walls for zoning that can change along with you.
The five topics in a row
The order below is the order of execution: first wall and ceiling, then the floor, then the window coverings and lighting, and finally the furniture and greenery. Each topic has its own page with the full explanation.

1. Wall finishing: acoustic and decorative
The wall determines how a room sounds and looks. Covering the whole wall absorbs sound and at the same time defines the look; individual panels do the same on a smaller surface. There are also 3D wall panels, photo walls, prints, lettering and writing walls in your corporate identity.
The individual panels are in the shop. A full wall, a print or lettering is custom work and goes through a quote.

2. Floor coverings: carpet, PVC, vinyl and tiles
The floor is usually the largest continuous surface and so determines the acoustics and walking comfort. We choose per room: carpet or carpet tiles where noise reduction counts, PVC or vinyl where ease of maintenance comes first, tiles or natural stone in the entrance and corridors. For warehouses there are poured and epoxy floors.
A floor is measured, ordered to size and laid; you receive a proposal per room and a quote. What you can order straight away is floor protection under the office chair.

3. Window coverings: blinds, screens and curtains
Window coverings control three things at once: glare on the screens, being seen from outside and heat gain in summer. There are blinds in aluminium, wood or plastic, roller blinds from translucent to blackout, and curtains, net curtains and acoustic curtains.
Every window has its own size, orientation and operation, so we do not sell these from the webshop either. It starts with a visit on site: assessing the incoming light, choosing the type and fabric, measuring up and fitting.

4. Lighting: panels, desk lamps and ambient light
Lighting determines how pleasant it is to work at a workstation. It is almost always about three layers at once: general lighting for the room, task lighting at the workstation and accent lighting for the look. We draw up a lighting plan per room, with daylight and artificial light together.
Unlike floor and window coverings, lighting is in the shop: LED panels, desk lamps, floor lamps, fittings and spots. Where both light and dampening are needed, there are fittings that combine the two.

5. Plants and greenery
Greenery gives an office colour, softness and structure, and makes clear where a zone begins and ends. We supply individual plants in planters and pots, planted room dividers and green panels for the wall. For spots with little daylight there are artificial plants; hydroculture with a water gauge needs less attention than plants in soil.
Planters and artificial plants are in the shop. A planting plan and periodic care go through a proposal; a maintenance contract is possible.
From measuring up to handover
Inventory and measuring up
We measure the rooms and map out what is there, what stays and what complaints there are about noise, light or maintenance. This conversation and the advice are free.
Overall design with sample cards
You receive an overall design with visualisation and sample cards, so the colours and materials of floor, wall, window and furniture are matched in one go.
Detailed quote
The design is followed by a quote, broken down per element. That way you see what the floor, the wall finishing, the window coverings and the lighting cost separately.
Scheduling and execution
We coordinate the work and fix the order: first wall and ceiling, then the floor, then the window coverings and lighting, and finally the furniture.
Handover and warranty
Our own installation team places the furniture and adjusts it. Office furniture comes with a five-year warranty. Your contact person remains available for questions and additional orders.
What you can order straight from the shop
Floor coverings and window coverings go through a proposal and a quote. Panels, lighting, planters and floor protection are in the shop.
A single element or the whole process
Replacing one element
If it is only the floor or only the window coverings, a visit on site for that element is enough. When choosing materials, we look at what is already there.
Together with a refurbishment
If the furniture is being replaced, that is the moment to include the finishing. See refurbishment and restyling.
As part of a project fit-out
For a complete building, the finishing is part of the project fit-out: one schedule and one handover for fit-out and furniture together.
No plan yet
If you do not know where to start yet, the step-by-step furnishing plan will help. For the workstations themselves there is workstation advice.
Advice on site
Within about 50 kilometres of Moordrecht, our advisers come to you to measure up. We deliver throughout the Netherlands.
Sustainable choices
Paint with low VOC emissions, floor coverings made from recycled material, FSC-certified wood and energy-saving LED lighting. See sustainable office interiors.
Related topics
Would you like your office fully finished? Call 010 - 753 60 40, request a quote or visit us at Westbaan 170 in Moordrecht.








Project fit-out →
Refurbishment and restyling →
Acoustics and room dividers →